Information about http://site.gridconnect.com/docs/PDF/XPort-Direct-FAQ.pdf

1630 Diehl Road Naperville, Illinois…

Tags: additional memory, dedicated network, diehl road, hardware capabilities, host device, host processor, interface software, maximum data rate, memory capacity, naperville illinois, network processor, networking protocol, processor module, program execution, program storage, protocol software, serial interfaces, serial ports, software capabilities, system networking,
Pages: 4
Language: english
Created: Wed Jan 31 10:20:12 2007
Display cached document
Page 1
image
Page 2
image
Page 3
image
Page 4
image
                 1630 Diehl Road
                 Naperville, Illinois 60563 USA
                 +1 630 245-1445, +1 630 245-1717 FAX




PRODUCT DESCRIPTION and POSITIONING

Q: Why is the XPort Direct a "total module" solution or "turnkey module"?

A: The XPort Direct contains all the hardware and software necessary to connect the
attached host device to a network. This includes:
      A dedicated Network Processor SoC (System on Chip)
      RJ45 Jack and Magnetics
      Program storage Flash (128KB) and Program Execution SRAM (256KB) memory
      Ethernet MAC and 10/100 PHY
      An operating system
      Networking protocol software
      Application software

Q: Why is it called an "embedded device gateway"?

A: The XPort Direct is an embedded module that provides a "gateway' between the
attached device and an Ethernet network or the internet.

Q: Is the XPort Direct a Networking Coprocessor Module?

A: Yes, it can also be considered a co-processor Module. It offloads the task of
networking from the device's host processor, to its own networking optimized DSTniŽ
processor.

Q: Is additional memory capacity available?

A: Additional memory capacity is not available

HARDWARE CAPABILITIES & INTERFACES

Q: Is the product pin-compatible with the XPort?

A: No, the product is not pin-compatible with the XPort.

Q: What is the maximum data rate for the XPort Direct?

A: The maximum data rate is 230Kbps.
Q: Does the product support RS232 and RS485 serial interfaces?

A: Yes, either RS232 or RS485 serial can be supported.

Q: How many serial ports are available on the WiPort NR?

A: One serial port is available.

Q: Is any additional interface, other than serial, such as I2C, supported?

A: No, the product does not currently support any other interface. Please contact your
Lantronix sales representative if you have a high volume opportunity requiring an
alternative interface.

SOFTWARE CAPABILITIES AND CONFIGURABILITY

Q: Does the XPort Direct support a device web server?

A: No, the XPort Direct does not support web services. The best selling XPort product is
the right product for an OEM who needs an embedded web server module

Q: Can the XPort Direct be configured using a web browser?

A: No, the XPort Direct, unlike the XPort, cannot be configured using a web browser.

Q: What do you mean by the statement that the XPort Direct allows network parameters
to be configured?

A: The XPort Direct supports the same degree of configuration of key network
parameters as the XPort. This degree of configurability ensures that the networked
device will interoperate, without difficulty, with virtually any Ethernet network or over the
internet.

Q: What are some examples of configurable network parameters?

A: The complete list is available in the XPort Direct User Guide. A partial listing includes
the following parameters:
           o Multiple IP Addressing mechanisms such as DHCP, BootIP and AutoIP,
           o Baudrate
           o Flow Control
           o Port Number
           o Connect Mode
           o Data Packing Control Intervals
          o Inactivity Timeout
          o MTU Size

SECURITY

Q: Does the XPort Direct support AES Encryption?

A: No, the XPort Direct does not currently support AES Encryption.

GPIO PINS/CONTROL PINS

Q: How many control pins are available on the XPort Direct?

A: The XPort Direct has 2 pins.

CUSTOM APPLICATION DEVELOPMENT

Q: Is the XPort Direct supported by Lantronix CoBos Programming Kit (CPK)?

A: No, please contact your Lantronix Sales Representative for a review of your
customization requirements. Wherever feasible, Lantronix will attempt to support your
needs for a high volume deployment opportunity.

TARGET MARKETS

Q: What are the target markets for the XPort Direct?

A: The XPort Direct is targeted at lower priced devices that are sold in high volumes.
The list of applications and devices is limited only by your imagination.

A small sampling of the markets for this module include the following:

   ˇ   Home automation
          ­ Residential Alarm Panels
                 ˇ Alarms over broadband
          ­ White Goods
                 ˇ Networked Control and Notification
   ˇ   Commercial Temperature Sensors and controllers
          ­ Remote Data Acquisition (Insurance purposes)
   ˇ   Building automation Equipment
          ­ HVAC Controllers
                 ˇ Remote Data Acquisition and Control
   ˇ   Consumer electronics
          ­ Audio equipment., iPod/PMP Docking stations
                   ˇ Networked Remote Control
                   ˇ Audio Content Streaming
    ˇ   Vending machines
    ˇ   Point of sale (POS) products
    ˇ   Electric & Gas meters
           ­ Remote Data Acquisition over broadband
    ˇ   RFID Readers
           ­ Ethernet Bridging
    ˇ   UPS Power Supplies
           ­ Remote Monitoring

DIFFERENCES TO XPort

Q: What are the differences between the XPort Direct and the XPort?

A: Please see the feature comparison chart below:




15353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: 949-453-3990 | Fax: 959-453-3995 | www.lantronix.com
1/15/2007                    XPort Direct - Frequently Asked Questions (FAQ)                            Page 4 of 4