…

                                                                  Approved by:                             Diva de Provence

DDP 02/06
                                                                                                     885 Don Mills Road, Suite 207
                                                                                                            Toronto,Ontario
                                                                                                                M3C 1V9
                                                                                                               Canada
                                                                                                          Tel: (416) 256-2646
                                                                                                          Fax: (416) 256-7121


                                           Quick Installation Guide - DDP-4
               To install the unit, create a cut-out in your countertop following the dimensions
                                    given on the drawing and the table below.
            This cooktop must be installed in
            accordance with pertaining local
            building, trade, fire protection and
            electrical codes. If local codes do
            not exist, then installation must
            be done in accordance with
            federal codes.

            The cooktop is to be connected -
            hard-wired - to the electrical power
            supply inside a client-supplied
            junction box which should be
            installed inside the cabinet below the
            unit.
            The unit must be properly
            grounded.

            This cooktop is to be installed under
            a ventilation hood or a downdraft
            ventilation system.
                                                                                 Cooktop and             Width           Depth         Thickness
             DDP-4 electrical characteristics are:                               Cut-out Sizes
             Operating voltage ... 240 V~ 60 Hz                                  Cut-out Size           750 mm         496 mm          142 mm*
             Total power ... 7200 W                                                                     [29 1/2"]      [19 1/2"]        [5 5/8"]*
                                                                                 Cooktop Box Size        743 mm        488 mm            92 mm
             Connect to ... 240 V, 60 Hz, 2 Pole+G,
                                                                                                        [29 1/4"]     [19 7/32"]       [3 5/8"]
                             40 A supply                                         Cooktop Rim Size        790 mm         518 mm           10 mm
                             (3 wire #8 AWG)                                                             [31 1/8"]     [20 3/8"]       [25/64"]

                                                                             *This dimension includes clearance underneath the unit of 50 mm [2"]

                 Cabinet Above                               Clearance

                                          Cross              You should keep:
                                         Section
                             750 [30"]




                                                                   - In the back of your unit - between the unit and any
                                                                   vertical surface: minimum clearance of 10 mm (3/8");

                                      Minimum                      - If a downdraft ventilation system is used - between the
                 10 [3/8"]
                                     Clearance                     unit and the downdraft snorkel: minimum clearance of
                                    Requirements                   6 mm (1/4");
                   Exhaust


                                                                   - Above the unit to any combustible surface - e.g. cabinet
                        DDP-4
                                                   50 [2"]




                                                                   above the unit: minimum clearance of 750 mm (30");
                 Air
               Intake
                                                                   - Below the unit - between the bottom of the unit and any
                        Cabinet Below
                                                                   horizontal partition inside your cabinet: minimum clearance
                                                                   of 50 mm (2").