Information about http://www.details-worktools.com/media/scms/Series_3_User_Guide_0907.pdf

Height-AdjusTable Worksurfaces | Series 3 User Instructions …

Tags: accessory power, cable management, cables, caution, dirt, hand crank, maximum height, monitors, power cord, power cords, rectangular table, series 3, surfaces,
Pages: 2
Language: english
Created: Fri Sep 14 15:28:44 2007

Display cached document

Page 1

Page 2

Height-AdjusTable Worksurfaces | Series 3 User Instructions
07-0001466
User Instructions
3
S E R I E S
Height Adjustment
Operating the Height Adjustment Controller
The worksurface adjusts via a simple hand crank.
� Four turns of the crank adjusts a rectangular table 1".
� Six turns of the crank adjusts a 90� or 120� table 1".
� Turn hand crank clockwise to raise the table
and counterclockwise to lower the table.

Cable Management
When installing equipment, either on the worksurface or below,
be sure that the connecting cables are free of obstruction.

Accessory Power Cord Length
� Ensure that power cords for all accessory items � computers, lights,
monitors, etc. � are of sufficient length to reach outlets throughout
the range of worksurface height adjustment. Do not subject the cords
to any strain while adjustment of the surface is taking place.
� Always check for proper operating clearance before placing any item
on, above or below the worksurface.

Maintenance
Regularly clean dust and dirt from lifting columns. To insure all surfaces
are thoroughly cleaned, make sure the lifting columns are fully telescoped
to their maximum height. Also, be sure to inspect for damage.
Caution: To protect the painted surfaces, use a damp cloth and a cleanser
that is not too highly alkaline or acidic. A pH neutral product is ideal.
Note: Please do not move your table on your own. Guidelines have been set-
up on how to move each table. Contact your Facilities group for assistance.

Questions?
www.details-worktools.com

Call 800.833.0411 or visit www.details-worktools.com.