Information about http://www.details-worktools.com/media/scms/AdjusTables_Cleaning_Instructions_1207.pdf
Keep it clean. …
Tags: fantastik, food condiments, formula 409, general purpose, hardware stores, health care industries, hidden location, iodine, ketchup, laminate tops, mild soap, paint supply, putty, scratches, smudges, soap and water, stains, steak sauce, urethane, wood grain,Pages: 3
Language: english
Created: Tue Dec 4 16:09:14 2007
Display cached document
Page 1
Page 2
Page 3
Keep it clean.
Height-AdjusTable Worksurfaces | Cleaning Instructions for Height-AdjusTable and Walkstaion
Simple ways to keep your Height-AdjusTable
or Walkstation nearly as clean as the day it was first installed.
Paints and Plastics
For painted metals and plastics - ordinary dirt, smudges
and water soluble stains can be removed with mild soap
and water. If needed for difficult stains, use a hardsurface,
all-purpose cleaner such as Formula 409® or Fantastik®.
Some oil-borne stains may require the use of a solvent based
cleaner, which should always be tested in a hidden location
prior to general use.
Worksurfaces
Wiping with a damp cloth will remove general soiling
and water-borne stains. If needed, use a hard-surface,
all purpose cleaner such as Formula 409® or Fantastik®.
Follow the manufacturer's instructions for general purpose
cleaning. To prevent staining, ink should be removed as
soon as possible.
To fill scratches in wood grain laminate tops, use an oak,
walnut, or mahogany putty stick which can be purchased
at paint supply and hardware stores.
Care and Cleaning instructions for Urethane Profile
Urethane profile edges are generally stain resistant to
most compounds or staining agents found in the office,
food and health care industries. Most food condiments
such as ketchup, mustard, steak sauce, etc will clean up
easily. However, bacteriostatic agents such as Iodine
and Betadine have the greatest staining potential and
care should be exercised to avoid exposing this product
to these as such stains can usually be only partially removed.
When cleaning, avoid using harsh cleaners with abrasive
additives. Never attempt to use sharp metal objects or
sandpaper to remove stains. Do not use bleach to clean
the edge. Do not use hard bristle brushes. All of these
will cause permanent damage to the edge and laminate
worksurface and will void the warranty.
Ordinary soiled edges caused by normal use can be cleaned
with a damp cloth or sponge and Clorox® Clean-Up®
Cleaner with Bleach or Formula 409®. For stains, if a
scrub brush is used, make sure it is a soft bristle type to
prevent scratching. Successive cleanings may be required
using a soft bristle brush and 70% Isopropyl Alcohol.
www. d e ta ils -wo rk to o ls . c o m
Urethane Profile Worksurface: has 90° corners. Front (user's)
edge has the urethane profile only. Back and side edges are flat.
When specifying a Urethane Profile worksurface, please choose
a finish: Black or Felt.
P.O. Box 1967 / CD-5E / Grand Rapids, MI 49501-1967 / www.details-worktools.com
©2007 Office Details Inc. All rights reserved. 12/07
Keep it clean.
Height-AdjusTable Worksurfaces | Cleaning Instructions for Height-AdjusTable and Walkstaion
Simple ways to keep your Height-AdjusTable
or Walkstation nearly as clean as the day it was first installed.
Your treadmill is constructed of quality materials and manufactured to provide many years of
faithful service. Simple routine cleaning and a preventive maintenance program will extend the
life of your treadmill.
To prevent electrical shock, be certain the treadmill is turned off and unplugged from the
electrical outlet before performing any cleaning or routine maintenance.
Regular Cleaning
Important: do not clean or wipe under the running belt.
Daily: Perspiration should be wiped from the control
console and treadmill surfaces after use.
Weekly: Wipe down your treadmill once a week with a
water dampened, soft cloth. Be careful not to get excessive
moisture between the edge of the overlay panel and the
console, as this might create an electrical hazard or cause
the electronics to fail.
Monthly: Clean dust and dirt under and behind your
treadmill once a month. Small rubber particles from
the soles of walking shoes will accumulate alongside
the belt and also behind the unit.
www. d e ta ils -wo rk to o ls . c o m
Expert Service: Expert service and maintenance at a
reasonable cost are available through a factory-trained,
authorized dealer. The dealer maintains a stock of repair
and replacement parts and has the technical knowledge
to meet your service needs.
P.O. Box 1967 / CD-5E / Grand Rapids, MI 49501-1967 / www.details-worktools.com
©2007 Office Details Inc. All rights reserved. 12/07